E1 Tie Ringing Service - Panasonic KX-TD816 Programming Manual

4.4 E1 Line Programming

[720] E1 TIE Ringing Service

Description
Sets a call receiving type for the E1 channels assigned to TIE. If "DIL" is selected, DIL 1:1 or
DIL 1:N will perform.
This programme is available for the KX-TD1232 only.
Selection
• Outside (CO) line number: 25 through 54,
• Type: TIE / DIL
Default
All outside lines – TIE
Programming
1.
Enter 720.
Display: 720 TIE RING
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter an outside line number 25, you can also press NEXT.
Display example: CO Line NO? 25
4.
Press NEXT.
Display example: CO25:TIE
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Press STORE.
7.
To programme another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
8.
Repeat steps 4 through 7.
9.
Press END.
Conditions
If "TIE" is selected for the E1 channels assigned to DR2, then not the DID, but the DIL 1:1 or
DIL 1:N will perform.
Features Guide References
E1 Line Service
TIE Line Service
350
( = all outside lines from 25 to 54)
E1 Programming