Cpc Signal Detection Incoming Set - Panasonic KX-TD816 Programming Manual

[405] CPC Signal Detection Incoming Set

Description
Assigns the expected minimum duration of the Calling Party Control (CPC) Signal on
incoming outside calls. If this is programmed, the system disconnects the line when the CPC
Signal is detected.
Selection
• Outside line (CO) number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
( =all outside lines)
• Time (milliseconds): Disable (no detection) / 100 / 200 / 300 / 400 / 500 / 600
Default
All outside lines – Disable
Programming
1.
Enter 405.
Display: 405 CPC INCOMING
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
• To assign all outside lines to one selection, press the
shows the contents programmed for outside line 01.
• You may disable CPC Signal Detection for an outside line.
General Programming
2.5 Outside Line Programming
key in step 3. In this case, the display
179