Doorphone Ringing Assignment - Day / Night - Panasonic KX-TD816 Programming Manual

[607-608] Doorphone Ringing Assignment – Day / Night
Description
These programmes assign the extensions which will ring when a doorphone call is received
during the day and night modes. Programmed extensions are also allowed to open the door.
Selection
• Jack number:
KX-TD816 – 01 through 16 (-1 / -2),
KX-TD1232 – 01 through 64 (-1 / -2),
( =all jacks, -1 = first part, -2 = second part)
• Doorphone number:
KX-TD816 – 1 and 2, two entries (max.)
KX-TD1232 – 1 through 4, four entries (max.)
Default
Jack 01-1– All doorphones; Other jacks – no doorphone (Day / Night)
Programming
1.
Enter a programme address (607 for day or 608 for night).
Display example: 607 DOOR SET DAY
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack number.
Display example: #01-1:1234
4.
Enter the doorphone numbers.
To assign no doorphone, press CLEAR.
To change the current entry, press CLEAR and enter the new doorphone numbers.
5.
Press STORE.
6.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
General Programming
2.7 Extension Programming
251