Panasonic KX-TD816 Programming Manual page 406

5.1 Optional Programming
Area Bit
02 1 If an outside party is transferred and
unanswered, assigns whether Transfer
Recall occurs at the transfer initiating
extension or at Operator 1.
2 If the restriction of outside call duration
is enabled in programme
[502] Extension-to-Outside Line Call
Duration Limit, assigns if the restriction
is done for both outgoing and incoming
calls or for outgoing calls only.
3 Allows you to remove confirmation tone
4. By default, a beep tone sounds when
a three-party conference is started /
ended.
4
Determines if the dialled " " and "#"
will be checked by Toll Restriction. This
assignment is required for certain
central offices (CO) to prevent toll
fraud. Some COs ignore the user-dialled
" " and "#". If your CO is such a type,
select "0" (no check).
5 Reserved
6 Allows you to remove confirmation tone
3. This tone is sent when a conversation
is established just after dialling the
feature number for accessing the
following features: Call Pickup, Paging,
Paging Answer, TAFAS, Hold Retrieve
and Call Park Retrieve.
7 An outside line set to pulse or call
blocking mode in programme
[402] Dial Mode Selection can have
two settings. This assigns the pulse
break ratio during dial pulsing. Select an
appropriate ratio depending on the
standard in your country.
406
Explanation
Description Selection Default
0 : initiating
extension
1 : Operator 1
0 : both calls
1 : outgoing calls
only
0 : disable
1 : enable
0 : no check
1 : check
0 : disable
1 : enable
0 : 60 % 0 for
1 : 67 % HK
1 for
Others
Features Guide
References
0 Call Transfer
0 None
1 Confirmation
Tone
1 Toll Restriction
1 Confirmation
Tone
Dial Type
Selection
Optional Programming