Panasonic KX-TD816 Programming Manual page 40

2.1 Manager Programming
Conditions
• A centralised telephone is a telephone connected to jack 01 or a jack programmed as a
manager extension in programme [006] Operator / Manager Extension Assignment.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available. Jack numbers in the out-of-service system are
unacceptable.
• The number of the CO buttons available depends on the telephone type. (Refer to Buttons
on Proprietary Telephones and Consoles in the Features Guide.)
• If you press the same CO button again in step 5, you can select a desired ringer frequency
for the CO button from eight types of ring tones. When you enter the tone type number (1
through 8), you will hear the selected tone type until STORE is pressed. This selection is
possible only for the CO buttons that have been assigned to Single-CO, Group-CO, or
Loop-CO.
Features Guide References
Button, Flexible
Buttons on Proprietary Telephones and Consoles
40 General Programming