Intercept Time - Panasonic KX-TD816 Programming Manual

[203] Intercept Time

Description
Sets the number of rings for the Intercept Routing – No Answer (IRNA) feature. If a call is not
answered after the programmed number of rings, the call is redirected to the programmed
extension.
Selection
Number of rings: 3 through 48
Default
12 rings
Programming
1.
Enter 203.
Display: 203 INTERCEPT
2.
Press NEXT.
Display example: Time:12 rings
3.
Enter the number of rings.
To change the current entry, press CLEAR and enter the new number of rings.
4.
Press STORE.
5.
Press END.
Conditions
• One ring is equivalent to five seconds.
• Programmes [409-410] Intercept Extension – Day / Night are used to programme the
destination of Intercept Routing on an outside line group basis in day and night modes.
• If the original extension has set Call Forwarding – No Answer, Intercept Timer starts after
the Call Forwarding.
• You cannot leave the entry empty.
Features Guide References
Intercept Routing
General Programming
2.3 Timer Programming
129