Did / Tie Format Number Assignment - Panasonic KX-TD816 Programming Manual

2.5 Outside Line Programming

[430] DID / TIE Format Number Assignment

Description
Assigns a Direct Inward Dialling (DID) and TIE format number to each outside line group.
Selection
• Outside line group (TRG) number: 1 through 8,
• DID / TIE format number: 1 through 8
Default
All outside line groups – Not stored
Programming
1.
Enter 430.
Display: 430 MODIFY FORM
2.
Press NEXT.
Display: TRK GRP NO?
3.
Enter an outside line group number.
To enter outside line group number 1, you can also press NEXT.
Display example: TRG1:Not Stored
4.
Enter a DID / TIE format number.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another outside line group, press NEXT or PREV, or SELECT and the
desired outside line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
This is the first and basic programming for the DID / TIE feature. If this assignment is changed,
it will affect other programming ([431] through [435]).
Features Guide References
Direct Inward Dialling (DID)
E1 Line Service
TIE Line Service
198
( =all outside line groups)
General Programming