[781] E1 Group-II
Description
Assigns a signal type for Group-II parameters on the E1 line assigned to MFC-R2.
This programme is available for the KX-TD1232 only.
Selection
• Parameter number: 01 through 15
• Signal type: Undefined / Subscriber / Operator / Collect Call
Default
Parameter 02 – Subscriber; Other parameters – Undefined
Programming
1.
Enter 781.
Display: 781 GROUP-II
2.
Press NEXT.
Display: Parameter NO?
3.
Enter a parameter number.
To enter a parameter number 01, you can also press NEXT.
Display example: 01:Undefined
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another parameter, press NEXT or PREV, or SELECT and the desired
parameter number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
E1 Line Service
E1 Programming
4.4 E1 Line Programming
397