Reverse Circuit Assignment - Panasonic KX-TD816 Programming Manual

[416] Reverse Circuit Assignment

Description
Enables or disables Reverse Circuit detection.
This programme is only available for the following models: KX-TD816BX/HK, KX-
TD1232DBX/ML, TDN1232.
Selection
• Outside line (CO) number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
( =all outside lines)
• Regular (no detection) / Reverse (detection)
Default
Regular
Programming
1.
Enter 416.
Display: 416 REV. CURRENT
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Regular
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all outside lines to one selection, press the
shows the contents programmed for outside line 01.
Features Guide References
Reverse Circuit
General Programming
2.5 Outside Line Programming
key in step 3. In this case, the display
195