Outgoing Message Time - Panasonic KX-TD816 Programming Manual

[215] Outgoing Message Time

Description
Sets the maximum allowable recording time for Outgoing Messages (OGM).
Selection
Time (seconds): 0 / 16 / 32 / 64 (0=no recording)
Default
32, 0, 32, 0 (for OGM 1 through 4 from left to right)
Programming
1.
Enter 215.
Display: 215 OGM MSG TIME
2.
Press NEXT to programme the time for OGM 1.
Display example: OGM:32, 0,32, 0
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Repeat steps 4 and 5 to programme the time for OGM's 3 and 4.
7.
Press STORE.
8.
Press END.
Conditions
• There are four messages available:
OGM 1: used for DISA (Direct Inward System Access) message 1 or UCD (Uniform
OGM 2: used for DISA message 2 or UCD message 2
OGM 3: used for Timed Reminder or UCD message 3
OGM 4: used for UCD message 4
• Enter the times starting from the left for OGM 1 to OGM 4.
• The total time of the outgoing messages cannot exceed 64 seconds.
Features Guide References
Direct Inward System Access (DISA)
Outgoing Message (OGM)
Timed Reminder
Uniform Call Distribution (UCD)
General Programming
to programme the time for OGM 2.
Call Distribution) message 1
2.3 Timer Programming
141