Ddi Number / Floating Number Conversion - Panasonic KX-TD816 Programming Manual

3.4 Extension Programming

[612] DDI Number / Floating Number Conversion

Description
Used to convert a Direct Dialling In (DDI) number to an floating number in order to place an
incoming DDI call at a specific floating station.
Selection
• Floating Station:
Operator / Pager 1 / Pager 2 / Pager 3 / Pager 4 / DISA 1 / DISA 2 / MODEM / EXT
Group 1 / EXT Group 2 / EXT Group 3 / EXT Group 4 / EXT Group 5 / EXT Group
6 / EXT Group 7 / EXT Group 8
(Pager 2 through 4 are available for the KX-TD1232 only.)
• DDI Number: 6 digits (max.)
Default
All floating stations – Blank
Programming
1.
Enter 612.
Display: 612 FLOAT DDI #
2.
Press NEXT to programme the operator.
Display: Operator:
3.
Enter a DDI number.
To delete the current entry, press CLEAR.
4.
Press STORE.
5.
To programme another floating station, press NEXT or PREV until the desired floating
station is displayed.
6.
Repeat steps 3 through 5.
7.
Press END.
Conditions
• Each DDI number can be a maximum of six digits, consisting of 0 through 9.
• To use this programme, "DDI conversion number" must be selected in programme
[990] System Additional Information, Area 06 - bit 13.
Features Guide References
Direct Dialling In (DDI)
330 ISDN Programming