Clip / Colp Number Assignment For Extension - Panasonic KX-TD816 Programming Manual

[617] CLIP / COLP Number Assignment for Extension

Description
Selects the type of additional number for the CLIP and COLP information when making and
answering a call through an ISDN line. You can select the type from one of the following:
DDI: Subscriber number + DDI number
None: Subscriber number + Optional number
Selection
• Jack number:
KX-TD816 – 01 through 16 (-1 / -2)
KX-TD1232 – 01 through 64 (-1 / -2)
(-1 = first part, -2 = second part)
• Types: DDI / Any number, 6 digits (max.)
Default
All jacks – DDI
Programming
1.
Enter 617.
Display: 617 CLIP/COLP #
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack number.
Display example: #01-1:DDI
4.
Press SELECT until the desired selection is displayed and enter the number, if required.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
ISDN Programming
3.4 Extension Programming
337