Time Frame; Caller Id/Did Call Routing - Panasonic KX-TVA50 Programming Manual

2.3.1 Service Group
Value Range
0 s–60 s

Time Frame

Specifies the start and end times for each time mode for each day of the week. Each day of the week can have
1 lunch mode, up to 2 night modes (1 at the beginning and end of the day) and up to 3 break modes. Lunch
and break modes can only be inserted into a day mode.
Follow the steps below to edit the time frame.
1.
Click Click to edit....
2.
Select a time mode, then enter the start and end times in the "Start At:" and "End At:" fields or drag the
edges of the time mode to mark the start and end times.
To copy the time mode schedule of one day to another day
1.
Select a time mode in the desired "copy from" day, and click Copy.
2.
Select a time mode in the desired "copy to" day, then click Paste.
To insert a break or lunch mode
1.
Right-click the desired day mode.
2.
Select "Insert Break" or "Insert Lunch".
3.
Click OK.
Note
•
This setting is only available when "Automatic" is selected in "Service Mode".
Default
Day: 09:00-17:00
Night: 00:00-09:00, 17:00-24:00
Lunch: None
Break: None
Value Range
00:00–24:00
Feature Manual References
2.2.46 Time Service

Caller ID/DID Call Routing

Enables or disables the Caller ID/DID Call Routing feature.
Default
Enable
Value Range
Disable, Enable
Feature Manual References
2.2.8 Caller ID Call Routing (APT/DPT Integration Only)
2.2.19 DID Call Routing (DPT Integration Only)
96 Programming Manual Document Version 3.0 2010/06