Table of Contents
Advertisement
Figure 59. Installing the 1.8 inch SSD cage
1.
1.8 inch SSD backplane connector
3.
1.8 inch SSD cage
5.
tab on the PSU 1 slot (2)
Next steps
1.
Install the 1.8 inch SSD carrier or SSD blank(s) into the SSD cage.
2.
Follow the procedure listed in after working inside your system.
Related Links
Safety instructions
Installing a 1.8 inch uSATA SSD blank
Installing a 1.8 inch uSATA SSD carrier
Removing the 1.8 inch uSATA SSD cage
Removing the 1.8 inch uSATA SSD backplane
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in before working inside your system.
136
2.
1.8 inch SSD backplane
4.
tab on the SSD cage
6.
slot on the chassis
Advertisement
Table of Contents
Troubleshooting
