Installing The System Top Cover (Front) - Dell PowerEdge C4130 Owner's Manual

Steps
1. Turn the system cover lock to the unlocked position.
2. Press the release tabs on the system top cover, and slide the cover toward the front of the system.
3. Hold the cover on both sides, and lift the cover away from the system.
Figure 8. Removing the system top cover (front)
1. system top cover (front)
3. system cover lock
Related Links
Safety instructions

Installing the system top cover (front)

Installing the system top cover (front)
Prerequisites
CAUTION: Do not operate the system without the system cover. This can result in overheating
and cause component damage.
1. Follow the safety guidelines listed in the safety instructions section.
2. Ensure that all internal cables are connected and routed correctly.
NOTE: Closing the system cover with incorrect cable routing can damage the cables.
Steps
1. Align the slots of the system top cover with the tabs on the chassis.
2. Slide the cover toward the back of the chassis until it locks into place.
3. Rotate the system cover lock to the locked position.
2. release tab (2)
61