Removing 2.5 Inch Cabled Hard Drives From The Hard Drive Cage - Dell PowerEdge C4130 Owner's Manual

Figure 45. Installing the 2.5 inch hard drive cage cover
1. slot on the hard drive cage (2)
3. hard drive cage cover
Next steps
1. Install the hard drive cage into the PSU 2 slot/2.5 inch hard drive slot on the chassis.
2. Follow the procedure listed in after working inside your system.
Related Links
Safety instructions
After working inside your system
Removing the optional 2.5 inch hard drive cage
Removing the optional 2.5 inch hard drive cage cover

Removing 2.5 inch cabled hard drives from the hard drive cage

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in before working inside your system.
3. Keep the Phillips #2 screwdriver ready.
4. Remove the 2.5 inch hard drive cage.
5. Remove the 2.5 inch hard drive cage cover.
122
2. hard drive cage
4. screw (2)