Table of Contents
Advertisement
Figure 58. Removing the 1.8 inch SSD cage
1.
1.8 inch SSD backplane connector
3.
1.8 inch SSD cage
Installing the 1.8 inch uSATA SSD cage
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in before working inside your system.
Steps
1.
Align the tabs on the SSD cage and the PSU 1 slot with the slots on the chassis and SSD cage.
2.
Press the SSD cage until the SSD backplane engages with the SSD backplane connector on the
system board.
2.
1.8 inch SSD backplane
135
Advertisement
Table of Contents
Troubleshooting
