Removing The 2.5 Inch Hard Drive Backplane (Rear) - Dell EMC PowerEdge R640 Installation And Service Manual

Hide thumbs Also See for EMC PowerEdge R640:
Table of Contents

Advertisement

Figure 81. Installing the hard drive backplane
Next steps
1
Connect all the cables to the backplane.
2
Install all the hard drives.
3
Install the backplane cover.
4
Install the air shroud.
5
Follow the procedure listed in
Related links
Installing a hard drive
Installing the backplane cover
Installing the air shroud

Removing the 2.5 inch hard drive backplane (rear)

Prerequisites
CAUTION:
To prevent damage to the drives and backplane, you must remove the hard drives from the system before removing
the backplane.
CAUTION:
You must note the number of each hard drive and temporarily label them before removal so that you can replace them
in the same locations.
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Remove all the hard drives from the rear hard drive cage.
4
Disconnect all the cables from the backplane.
5
Remove the rear hard drive cage
After working inside your
system.
Safety
instructions.
Before working inside your
system.
Dell EMC PowerEdge R640 Installation and Service Manual
Installing and removing system components
127

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents