Installing The Gpu Brackets On The Gpus Removed From Your System - Dell PowerEdge C4130 Owner's Manual

3. screw (8)
Next steps
Install the brackets on the GPU that you removed from your system.
Related Links
Safety instructions

Installing the GPU brackets on the GPUs removed from your system

Installing the custom GPU brackets on the replacement GPUs
Installing the GPU brackets on the GPUs removed from your system
This procedure is not applicable to the AMD replacement GPUs because they are shipped without the I/O
and support brackets. The Nvidia or Intel replacement GPUs are shipped with specific Nvidia or Intel I/O
and support brackets. These brackets should be removed from the replacement Nvidia or Intel GPUs and
installed on the Nvidia or Intel GPUs removed from your system. The procedure to install the Nvidia or
Intel brackets on the GPUs removed from your system is identical.
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be
performed only by Dell certified service technicians.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Keep the Phillips #1, #2, and the Torx T6 screwdrivers ready.
3. Remove the GPU brackets.
Steps
1. Align the screw holes on the front I/O bracket with the screw holes on the GPU.
2. Secure the I/O bracket to the GPU by using the screws.
3. Align the screw holes on the support bracket with the screw holes on the GPU.
4. Secure the support bracket to the GPU by using the screws.
4. I/O bracket
165