Removing A Processor - Dell PowerEdge C4130 Owner's Manual

Figure 24. Removing the heat sink
1. retention screw (4)
3. processor socket
Next steps
Remove the processor
Related Links
Safety instructions
Removing the cooling shroud
Removing the PCIe shroud

Removing a processor

Installing a heat sink
Before working inside your system
After working inside your system
Removing a processor
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: To ensure proper system cooling, you must install a processor blank in any empty processor
socket.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #2 screwdriver ready.
4. Remove the cooling shroud.
90
2. heat sink
4. heat sink retention socket (4)