Dell PowerEdge C4130 Owner's Manual page 125

NOTE: If you are installing four hard drives, ensure that you install hard drives 3/D and 2/C before
you install hard drives 1/F and 0/E.
NOTE: If you are installing two hard drives, install hard drives 1/F and 0/E.
NOTE: To maintain proper system cooling, a minimum of 2 hard drives must be installed in hard
drive slots 0/E and 1/F.
Steps
1. To install hard drives 3/D and 2/C, perform the following steps:
a. Slide hard drive 3/D into the hard drive cage.
b. Lower hard drive 2/C into the hard drive cage.
c. Secure the hard drives to the hard drive cage by using the screws.
d. Connect the power/signal cable to the hard drives.
e. Route the cables through the cable routing clip on the hard drive cage.
Figure 48. Installing a 2.5 inch cabled hard drive (hard drive 2/C and hard drive 3/D) from the hard drive
cage
1. screw (8)
3. cable routing clip
5. signal cable
7. hard drive 3/D
2. To install hard drives 1/F and 0/E, perform the following steps:
a. Slide hard drive 1/F into the hard drive cage.
b. Lower hard drive 0/E into the hard drive cage.
c. Secure the hard drives to the hard drive cage by using the screws.
d. Connect the power/signal cable to the hard drives.
2. hard drive cage
4. power cable
6. hard drive 2/C
125