Removing A Gpu Riser Cable Board - Dell PowerEdge C4130 Owner's Manual

9. GPU riser cable board
Next steps
Remove the GPU riser cable board.
Related Links
Safety instructions
Removing a GPU riser cable from the system board
Installing a GPU

Removing a GPU riser cable board

Removing a GPU riser cable board
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be
performed only by Dell certified service technicians.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Keep the Philips #2 screwdriver ready.
3. Remove the GPU from the chassis.
4. Disconnect the power cables connected to the GPU.
Steps
1. Remove the screws securing the GPU riser cable board to the GPU.
2. Pull the GPU riser cable board to disengage the connector on the GPU riser cable board from the
GPU.
3. Remove the GPU riser cable routed through the GPU riser cable clip.
159