Installing The Power Supply Unit Blank - Dell PowerEdge C4130 Owner's Manual

Installing the power supply unit blank

Install the power supply unit (PSU) blank when you remove PSU 2 or the 2.5 inch hard drive cage from
the PSU 2 slot. Install the PSU blank only in the PSU 2 slot.
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. If applicable, remove PSU 2 or the 2.5 inch hard drive cage.
Steps
Align the power supply unit blank with the power supply unit slot and push it into the power supply
unit slot until it clicks into place.
Figure 39. Installing the PSU blank
1. PSU blank
Related Links
Safety instructions
Removing the optional 2.5 inch hard drive cage
Removing an AC power supply unit
Removing the power supply unit blank
114
2. PSU slot