Installing A Heat Sink - Dell PowerEdge C4130 Owner's Manual

8. Align the pin-1 indicator of the processor with the triangle on the .
CAUTION: Do not use force to seat the processor. When the processor is positioned
correctly, it engages easily into the socket.
9. Place the processor on the socket such that the slots on the processor align with the socket keys.
10. Close the processor shield.
11. Lower the close first socket-release lever near the lock icon
12. Similarly, lower the open first socket-release lever near the unlock icon
to lock it.
Next steps
NOTE: Ensure that you install the heat sink after you install the processor. The heat sink is necessary
to maintain proper thermal conditions.
1. Install the heat sink.
2. Install the cooling shroud.
3. If applicable, install the PCIe shroud.
4. While booting, press F2 to enter System Setup and verify that the processor information matches the
new system configuration.
5. Run the system diagnostics to verify that the new processor operates correctly.
Related Links
Safety instructions
Before working inside your system
After working inside your system
Removing a processor blank

Installing a heat sink

Installing the cooling shroud
Installing the PCIe shroud
Removing a processor
Installing a heat sink
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Keep the Phillips #2 screwdriver ready.
3. Follow the procedure listed in the Before working inside your system section.
4. Remove the cooling shroud.
5. Remove the PCIe shroud.
6. Install the processor.
and push it under the tab to lock it.
and push it under the tab
95