Installing A 1.8 Inch Usata Ssd Into A Ssd Carrier - Dell PowerEdge C4130 Owner's Manual

1. Follow the safety guidelines listed in the Safety instructions section.
2. Turn off the system, including any attached peripherals.
3. Remove the SSD carrier from the SSD cage.
NOTE: The SSD is installed in the SSD carrier.
Steps
1. Turn the SSD carrier over.
2. Pull the rails of the SSD carrier and lift the SSD out of the SSD carrier.
Figure 56. Removing a 1.8 inch SSD into a SSD carrier
1. SSD carrier
Next steps
Install the SSD into the SSD carrier.
Related Links
Safety instructions

Installing a 1.8 inch uSATA SSD into a SSD carrier

Installing a 1.8 inch uSATA SSD into a SSD carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Steps
1. Insert the SSD into the SSD carrier with the connector end of the SSD toward the back of the SSD
carrier.
2. Press the SSD until it is firmly seated.
2. SSD
133