Table of Contents
Advertisement
Steps
1.
Press the release latches located on the GPU riser cable connector on the system board.
NOTE: Pressing the release latches will not eject the GPU riser cable from the system board.
2.
Pull the GPU riser cable out of the GPU riser cable connector on the system board.
Figure 74. Removing a GPU riser cable from the system board
1.
riser cable connector
3.
release latch (2)
Next steps
Remove the GPU.
Related Links
Safety instructions
Before working inside your system
Removing a GPU
Removing a GPU
To remove GPU 2, remove GPU 1 first and to remove GPU 4, remove GPU 3 first.
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be
performed only by Dell certified service technicians.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
riser cable connector on the system
board
157
Advertisement
Table of Contents
Troubleshooting
