Processor Blank - Dell PowerEdge C4130 Owner's Manual

Steps
1. Align the guide slots on the cooling shroud with the screws on the heat sink.
2. Lower the cooling shroud into the chassis until it is firmly seated.
Figure 18. Installing the cooling shroud
1. screw on the heat sink (2)
3. heat sink
Next steps
1. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system
Removing the cooling shroud

Processor blank

Related Links
Removing a processor blank
Installing a processor blank
76
2. guide slot on the cooling shroud (2)