Installing The Cooling Shroud - Dell PowerEdge C4130 Owner's Manual

Figure 17. Removing the cooling shroud
1. screw on the heat sink (2)
3. heat sink
Next steps
1. Install the cooling shroud.
Related Links
Safety instructions
Before working inside your system

Installing the cooling shroud

Installing the cooling shroud
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Ensure that the memory module ejectors are closed.
2. guide slot on the cooling shroud (2)
75