Figure 19: Attaching The Inner Rails To The Chassis; Figure 20: Securing The Chassis In The Inner Rails - Mellanox Technologies SN2100 Hardware User Manual

Installation
Secure the chassis in the inner rails by screwing the 2 flat head Phillips screws (F) in the desig-
Step 5.
nated points with a torque of 1.5±0.2 Nm.
Slide the switch into the rack by carefully pushing the inner rails into the outer rails installed on
Step 6.
the rack.

Figure 19: Attaching the Inner Rails to the Chassis

Figure 20: Securing the Chassis in the Inner Rails

Mellanox Technologies
Rev 1.6
25