648 Port InfiniBand FDR Switch Platform Hardware Installation Guide
1.2 Chassis Package Contents
The package includes:
•1 chassis with the following modules installed:
•
•
•1 Installation Guide
•1 chassis
•1 box containing various other parts
•1 installation kit box
•1 box containing 10 power cords 250v 15a 2.0M, C14 to C13, USA UL Standard
•1 cable management kit
Before you install your new SX6536 series chassis, unpack the system and check to
make sure that all the parts have been sent, check this against the parts list. Check the
parts for visible damage that may have occurred during shipping.
1.3 Leaf Package Contents
The leafs are ordered by the customer and are shipped 4 to a box. The customer will
receive as many boxes as needed to fill the order.
Mellanox Technologies
The system requires a KVA rated UPS system. It is recommended that a UPS system
be installed to protect the equipment in the event of unexpected power failure.
Make sure that the outlets and circuits will not be overloaded. Spread out the load over
at least two or three circuits or use a 3 phase circuit.
8 fans
10 PSUs
If anything is damaged or missing, contact your customer representative immediately.
The rack mounting holes conform to the EIA-310 standard for 19-inch racks. Guaran-
tee proper ventilation, by leaving 8cm (3") of space to the front and rear of the switch.
This will ensure proper air flow through the chassis. This is crucial for maintaining
good airflow at ambient temperature. In particular, route cables such that they do not
impede the air into or out of the chassis.
Rev 1.4
9