Figure 52: System Status Leds - Front And Rear Sides In Sn2700; Figure 53: System Status Leds - Front And Rear Sides In Sn2410; Figure 54: System Status Led In Sn2100; Leds - Mellanox Technologies SN2100 Hardware User Manual

Rev 1.6
3.2.1.1 System Status LED

Figure 52: System Status LEDs - Front and Rear Sides in SN2700

Figure 53: System Status LEDs - Front and Rear Sides in SN2410

Both of the System Status LEDs (front and back, if exist) supply identical information.
54 Mellanox Technologies
Both of these LEDs in the red
ovals show the system's status.
Both of these LEDs in the red
ovals show the system's sta-
tus.

Figure 54: System Status LED in SN2100

It may take up to five minutes to turn on the system. If the System Status LED shows
red after five minutes, unplug the system and call your Mellanox representative for
assistance.
The LED in the read oval is located on
the front panel of SN2100. There are no
LEDs in the rear panel of SN2100.
Interfaces