Rev 1.6
2.5.2
Telescopic Rail Kit for SN2700
There are two installation kit options:
• Standard depth systems should be mounted using the standard rail kit.
• Short depth systems can be mounted using either of the rail kits.
Table 8 - Installation Kit
Kit OPN
MTEF-KIT-B
MTEF-KIT-S
The following parts are included in the rail kit package (see
• 1x Right inner rail (A)
• 1x Left inner rail (B)
• 2x Outer rails (C)
• 2x Outer rails (D)
• 10x M6 Standard cage nuts¹ ² and 10x M6 Standard pan-head Phillips screws¹ (E)
• 2x Phillips100 DEG F.H TYPE-I ST.ST 6-32 X 1/4 screw with around patch (F)
¹ Other threads are available by special order: M5, 10-32, 12-24
² G-type cage-nut is available by special order.
22
Mellanox Technologies
The Telescopic rail kit is not included in the system's package, and can be purchased
separately.
The rails must be separated prior to the installation procedure. See
Rack Size and Rack Depth Range
Short (17"-24" \ 43.1 to 61 cm)
Standard (24"-34" \ 61 to 86.3 cm)
Figure
15):
Figure
16.
Installation