Installation
Carefully position the SE (single ended) cables one on top of the other, and use three cable-ties
Step 2.
to pair them together, as shown in
Place the coupled cables in the designated area within the right flat blade (the blade with 7
Step 3.
screw holes) as shown in
While pairing the cables, make sure the cables are paired in symmetry to the switch, in
order to avoid damaging the cables.
Figure 31: Coupling the Cables with Cable-ties
Figure 32: Coupled Cables - Rear View
Figure
Figure 33: Cables within the Rail
Figure
31.
31.
Mellanox Technologies
Rev 1.6
33