Side By Side Mounting For Sn2100 Rail Kit - Mellanox Technologies SN2100 Hardware User Manual

Installation
2.5.4

Side by Side Mounting for SN2100 Rail Kit

Table 10 - Installation Kit
Kit OPN
MTEF-KIT-D
The following parts are included in the rail kit (see Figure 30):
• 1 metal frame for two systems (A)
• 2 system mounting blades with 8 screw holes - the kit contains enough rails to install 2
systems (B)
• 2 system mounting blades with 7 screw holes - the kit contains enough rails to install 2
systems (C)
• 2 frame rail slides (D)
• 30 flat head 4-40 screws - the kit contains enough screws to install 2 systems (E)
• 2 blank covers (F)
• 10 (+2 spare units) M6 pan head screws (G)
• 10 (+2 spare units) M6 spring washers (H)
• 10 (+2 spare units) M6 spring steel cage nuts (I)
• 6 (+2 spare units) cable-ties (J)
A designated rail kit for the SN2100 systems can be purchased separately.
This section is relevant to short-depth systems that allow such form of installation
only.
At least two people are required to safely mount the system in the rack.
Rack installation kit for SN2100 series short depth 1U switches, allows instal-
lation of one or two switches side-by-side into standard depth racks
Rack Size and Rack Depth Range
Mellanox Technologies
Rev 1.6
31