Figure 17: Attaching The Inner Rails To The Chassis; Figure 18: Securing The Chassis In The Inner Rails - Mellanox Technologies SN2700 Hardware User Manual

Rev 1.2
Secure the chassis in the inner rails by screwing the 2 flat head Phillips screws (F) in the desig-
Step 5.
nated points with a torque of 1.5±0.2 Nm.
Slide the switch into the rack by carefully pushing the inner rails into the outer rails installed on
Step 6.
the rack.
26 Mellanox Technologies

Figure 17: Attaching the Inner Rails to the Chassis

Figure 18: Securing the Chassis in the Inner Rails

Installation