Figure 55: Fan Status Led In Sn2700 - Front And Rear Sides; Figure 56: Fan Status Led In Sn2410 - Front And Rear Sides - Mellanox Technologies SN2100 Hardware User Manual

Interfaces
Table 15 - System Status LED Assignments
LED Behavior
Solid Green
Flashing Green
Solid Red
3.2.1.2 Fan Status LED
The system is up and running nor-
mally.
The system is booting up.
Major error has occurred. For exam-
ple, corrupted firmware, system is
overheated etc.

Figure 55: Fan Status LED in SN2700 - Front and Rear Sides

Both of these LEDs in the red
ovals show the fans' status.

Figure 56: Fan Status LED in SN2410 - Front and Rear Sides

Both of these LEDs in the red ovals
show the fans' status.
Description
N/A
Wait up to five minutes for the end of the
booting process.
If the System Status LED shows red five
minutes after starting the system, unplug the
system and call your Mellanox representa-
tive for assistance.
Action Required
Mellanox Technologies
Rev 1.6
55