Table 11: Serial Terminal Program Configuration - Mellanox Technologies SN2100 Hardware User Manual

Installation
Configure a serial terminal program (for example, HyperTerminal, minicom, or Tera Term) on
Step 2.
your host PC with the settings described in
CLI prompt of the system.
Table 11 - Serial Terminal Program Configuration
Baud Rate
Data bits
Stop bits
Parity
Flow Control
Step 3.
ration wizard will start.
To configure network attributes and other initial parameters to the system, follow the configu-
Step 4.
ration wizard as shown in
Table 12 - Configuration Wizard Session
Mellanox configuration wizard
Do you want to use the wizard
for initial configuration? yes
Step 1: Hostname? [switch-1]
Step 2: Use DHCP on mgmt0
interface? [no] yes
Step 3: Enable IPv6? [yes]
Step 4: Enable IPv6 auto-config
(SLAAC) on mgmt0 interface?
[no]
Step 5: Enable DHCPv6 on
mgmt0 interface? [no]
Parameter
115200
8
1
None
None
Login as admin and use admin as password. On the first login, the MLNX-OS configu-
Table
Wizard Session Display
Table 11. Once you perform that, you should get the
Setting
12.
You must perform this configuration the first time you operate the
system or after resetting the system. Type 'y' and then press
<Enter>.
If you wish to accept the default hostname, press <Enter>. Other-
wise, type a different hostname and press <Enter>.
Perform this step to obtain an IP address for the system. (mgmt0 is
the management port of the system).
If you wish the DHCP server to assign the IP address, type 'yes'
and press <Enter>.
If you type 'no' (no DHCP), then you will be asked whether you
wish to use the 'zeroconf' configuration or not.
If you enter 'no' (no Zeroconf), you must enter a static IP, and the
session will continue.
The management interface will be able to use IPv6 addresses.
If you enter "no" (no IPv6), you will automatically be referred to
Step 6.
This turns on auto-configuration of the IPv6 addresses. This is
unsuitable for DHCPv6.
To enable DHCPv6 on the MGMT0 interface.
Comments
Mellanox Technologies
Rev 1.6
43