Daikin DCM601A51 Technical Data Manual page 97

ED721208
KRP1BA54, B56, BA57, BA59
•
Refer to the WIRING DIAGRAM attached to the indoor unit before attempting to wire.
[Make sure wires to units do not pass over the PCB when wiring]
•
Wire the adaptor to the indoor unit as described below.
Fetching the operation display signal
•
Attaching an hour meter
Output is generated at the contact while
the compressor is running.
Example:
1.7 Adaptor for Wiring <KRP1B61 / KRP1BA54, B56, BA57, BA59 / KRP1C63, C64>
Carrying capacity
20mA and above
or 1.2A and below
X1
AC 220
~240V
X2
HM
HM: Hour meter
(Field supplied part)
(FXZQ,FXD(Q) : X16A)
Indoor unit PCB
•
Fan ON display
Output is generated at the contact while the
fan is running.
Carrying capacity
20mA and above
Example:
or 1.2A and below
X1
X2
OL
OL: Operation lamp
(Field supplied part)
Adaptor
AC 220
~240V
93
4