Daikin DCM601A51 Technical Data Manual page 88

Adaptor
1.6.2 Part Names and Functions
Lower group number
switch (SW1)
1.6.3 Electric Wiring Work and Initial Settings
<Wiring procedure>
Room air conditioner indoor unit
DAIKIN
To HA connector (S21)
Once the switches are set and
the wiring complete, secure the
case using the included
screws.
Cable available field supply
(See the installation manual of
the centralized control equipment.)
Centralized control
equipment
DCS302 Series
DCS301 Series
DCS601 Series
DST301 Series
KRC65, KRC72,
KDC100A10, and KDC101B
Series cannot be connected.
In case that the
centralized control
equipment is connected
84
Upper group number
switch (SW2-1to 3)
Operation when recovering
from a power outage mode
switch (SW2-4)
1 ON
1 2 3 4 1 2 3 4
0 OFF
SW1 SW2
S6
Tes1
S16
S19
F1 F2
Supplied connection
harness
Non polarity
Separately sold
Included in the
remote control
Drain Up Kit.
code (quadplex)
KRCW101A Series
Tele-con Remote controller
(Field supply)
The adaptor included
with the remote
controller is not used.
In case that the device Connecting a Wired
coping with HA JEM-A Remote Controller
is connected
Service monitor (LED1: green)
When the CPU is working
properly, the LED flashes.
LED1
SW3
S1 S8 S5
ON
1
1 2 3 4 1 2 3 4
OFF
0
SW1 SW2
S6
Tes1 S1
S16
S19
F1 F2
Card key
BRC944 Series (Field supply)
BMS
(Field supply)
Connecting a
Momentary / constant
Contact Input Equipment
1.6 Interface Adaptor for DIII-NET Use (RA) <KRP928B2S>
Japanese unit / Overseas unit
Setting switch (SW3-3)
Momentary contact / constant contact
Selection switch (SW3-2)
Forced stop
Settings switch (SW3-1)
Power supply terminal (S8)
Connect an external DC 12V power
supply only when reading the
Operating / error display.
LED1
SW3
S8 S5
A cable
field supply
BMS
(Field supply)
Reading the Operating /
error Display
ED721208
A cable
field supply