Daikin DCM601A51 Technical Data Manual page 312

Commissioning Manual
IP address set up
in controller
Web server port number
set up in controller
5.
The registered iTM's IP address, Web server port number, connection status, and controller
name are listed in
The Delete button
The Order button
The Update button
refresh the list (5).
308
Item
"1 to 223(*)"."0 to 255"."0 to 255"."0 to
255"
* Addresses starting with "127" cannot
be set up since they are for loopback.
Default: 80
User Setting: 1024 to 65535, in
increments of 1
(5)
(6) allows you to delete the iTM selected in the list.
(7) allows you to sort the list.
(8) allows you to acquire connection statuses and controller names and
NOTE
You must enable the "Web Remote Management" option of each iTM you want to register.
See "5-2 Dealer Option Setup" in this manual.
The controller name is the name set up in the network settings on the iTM unit. See "6-1
Network" in this manual.
The controller name is automatically acquired if the communication between iTM
integrator and iTM is working normally.
Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager
Possible value range
(6)
(5)
(8)
Value at Initial value at
shipment new registration
— 192.168.0.1
— Default: 80
(7)
ED721208
118