Basic Setup; Powering On Data Backup Battery; Powering On Intelligent Touch Manager And Air Conditioners - Daikin DCM601A51 Technical Data Manual

ED721208
4
4.1
4.2
32
If you are sure that all connections have been made, proceed to the basic setup of the
intelligent Touch Manager. Here, "basic setup" means setting up the intelligent Touch Man-
ager in preparation for controlling the operation of your air conditioning system.
Turning on the power of the intelligent Touch Manager starts a setup program that lets you
complete the basic setup procedure. You can complete the basic setup procedure by fol-
lowing the instructions displayed on the monitor display in steps.
The setting assignment made through this procedure may be changed at a later time.
The following sections appear in the order of the setup steps.
To retain the settings even in the event of a power outage, the intelligent Touch Manager
do is to enable it.
Open the front slide cover and turn the screws to
Turn on the intelligent Touch Manager and the air conditioners connected to it.
1. First power on the air conditioners and then power on the intelligent Touch Manager.
The Title screen appears and, after a while, the message "Ready to set up A/C central-
ized address" appears.
each air conditioner. Refer to "4.8 Assigning a DIII-NET address for each air con-
2.
The Language Settings screen appears.
CAUTION
Installation Manual 3P291714-1
DCM601A51 intelligent Touch Manager
Installation Manual
5
A DIII-
English
163