Installation Manual
4.7
4.8
4.8.1
English
166
On the A/C Auto Register screen, the message "The following A/C has been connected.
appears.
1.
If you see any problem, touch Show Updates to reload the up-to-date information, or
review the DIII address settings.
2.
The intelligent Touch Manager restarts and Main screen appears. The intelligent Touch
Manager setup has now been completed.
NOTE
When iTM plus adaptor is connected, power on the iTM plus adaptor in advance.
Assigning a DIII-NET address for each air conditioner
manually using the remote controller for each air conditioner.
There are remote controllers of several types, each requiring a different way of assigning
lers, wired and navigation remote controllers, as examples.
NOTE
The names of buttons and areas of a wired remote controller used in this section are
shown below.
A
Address display area
B
Parameter number display area
C
Programming time buttons
D
Temperature setting buttons
E
F
Inspection / Test operation button
Installation Manual 3P291714-1
DCM601A51 intelligent Touch Manager
ED721208
-
A
B
C
D
E
F
35