ED721208
1.4
1.4.1
1.4.2
1.4.3
Required installa-
tion space
English
Be sure to install the iTM integrator in a place that meets the conditions described in 1.4.1
through 1.4.3 below.
Below are the description of the installation place and mounting direction. Be sure to
Installation place: Indoor, free from dust and water splashes
Mounting direction: Vertical
Make sure that the installation environment meets the following conditions.
The ambient temperature must be 0 to 40 °C.
There must be no electromagnetic disturbance.
To install the iTM integrator, the following space is required. Make sure that there is a
minimum clearance of 30 mm from the top edge, 100 mm from the left side edge, 30 mm
from the right side edge, and 60 mm from the bottom edge of the unit.
100mm
243mm
290mm
B
A
Top
B
Wall
Installation Manual 3P291714-5
DCM601A53 iTM integrator
A
30mm
100mm
MONITOR
60mm
MONITOR
60mm
Installation Manual
5
30mm
MONITOR
MONITOR
13
199