Installation Manual
1.3
1.3.1
10
196
Understand the arrangement of terminals and the location of openings on the unit and
plan how to route the cable and in which order to connect its wires to facilitate the instal-
lation procedure. For connection details including the cable type and terminal size, refer to
"2. Connection".
Rear face
Most terminals are located on the rear face of the iTM integrator. However, they are cov-
ered with a terminal cover for safety reasons. Removing 2 screws to detach this cover
reveals various types of terminals as shown below.
A
[POWER] The power line connection terminals. A power supply voltage of 100 to 240
mount used for securing the power supply cables with cable ties.
B
[DIII]
C
D
[RESERVE]
E
[RS-485]
F
G
H
[LAN] The socket for connecting the iTM integrator to an Ethernet network.
Installation Manual 3P291714-5
DCM601A53 iTM integrator
ED721208
English