Daikin DCM601A51 Technical Data Manual page 251

ED721208
2. (1)
registered, columns other than Group Addr. are displayed blank.
The displayed contents are as indicated in the table below.
Changeover Option
*1 See the table below for the correspondence between the content displayed in the Changeover Option column and its meaning.
*2 Comm Err
Maintenance : A group address of a connected unit under maintenance.
Changeover
Option
Selectable
3. Select the indoor unit for which you want to set the Changeover Option from
Settings button (2). The Changeover Option becomes "Able". At that moment, the Changeover
4. Select the indoor unit for which you want to release the Changeover Option from
the Release button (3). The Changeover Option becomes "Selectable". At that moment, the
Changeover Option for the other indoor units in the same refrigeration system also becomes
"Selectable". Touching the Refresh button
screen using the Close button.
is an air conditioner list displaying all Group Addresses. When no management points are
Column Displayed information
Group Addr. Group address number
Displays the name of the
Name
Refrigeration system number of
the connected unit.
OD-Unit Addr. "----" is displayed for units for
which the refrigeration system
number could not be acquired.
Whether Changeover Option is
available or not for the connected unit.
Error code detected in the connected unit.
Err Code
Blank when there are no errors.
Unit connection status
Connection
Blank when normal.
Type of the connected unit.
Type Blank when type is not
: Group address of the connected unit with communication error.
Able Unit with Changeover Option.
There is an indoor unit with Changeover Option within the same refrigeration system.
There are no indoor units with Changeover Option within the same refrigeration system.
---
Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager
Characters permitted by Mgmt. Point Data
connected unit.
registered.
Meaning
[Legend]
(4) updates the contents displayed in (1). Close the
Commissioning Manual
Value range
1:1-00 to 8:4-15
Register.
*1
Possible Error Code values
*2
Availability for selection
Release Setup button
button
×
× ×
×
× ×
: Not greyed out ×: Greyed out
(1) and touch the
(1) and touch
6
42
247