Daikin DCM601A51 Technical Data Manual page 215

ED721208
New installation (By using the pre-engineering tool)
Prepare various information.
Check the equipment to connect to DIII-NET.
Allocate the Group Address.
Acquire the upgrade data.
Back up the iTM data.
* In the case of maintenance (When pre-engineering by
using the current settings)
Set up management points.
(Pre-engineering tool, spreadsheet such as Microsoft
Excel)
Create the Layout View.
(Layout View creation tool)
* When necessary
Acquiring the Activation key
* When necessary
At the site
Install the iTM.
Install the upgrade data.
Make basic settings.
(Boot sequence)
Set up "Main" and "Sub".
Install pre-engineering data and Layout View data.
Activate optional maker functions.
Enable dealer options.
* When necessary
See:
4-8 Upgrade
4-9 Backup
4-7 Pre-engineering
Commissioning Manual Supplementary
Volume
Layout View Creation Tool (EM11A024)
5-1 Activation
Installation Manual (EM11A016)
4-10 Installation
Installation Manual (EM11A016)
4-3 DIII-NET Engineering
4-10 Installation
5-1 Activation
5-2 Dealer Option Setup
Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager
Commissioning Manual
Acquiring the Activation key
Entering the Activation key
6
6
211