Daikin DCM601A51 Technical Data Manual page 93

ED721208
Installation differs according to models as shown below.
Do not bundle low and high voltage wires together.
Bundle any access wires with the attached clamps so as to keep loose wirings off the indoor unit PCB
Ceiling mounted built-in type
FXS
Ceiling mounted duct type
FXM40~125
Indoor unit PCB
Ceiling mounted cassette type
FXC (Q)
Note: A separate plate is needed to install the adaptor PCB.
Ceiling mounted low silhouette duct type
FXYD-KA
PCB support
Adaptor PCB
KRP1B61
Note: Installation box is necessary for second adaptor
1.7 Adaptor for Wiring <KRP1B61 / KRP1BA54, B56, BA57, BA59 / KRP1C63, C64>
Indoor unit PCB
Indoor unit PCB
Ceiling mounted cassette type
FXK (Q)
FXM (Q) 200 · 250
Indoor unit PCB
Floor-standing type
FXL (Q)
FXN (Q)
Adaptor
Indoor unit PCB
Indoor unit PCB
89
4