ED721208
4. The areas and management points you have just added are displayed on the screen.
To delete an area or management point, select the area or management point and then click the
Delete button (23).
To move an area or management point, select the area or management point using the mouse
and drag it to a new location. Alternatively, click the Coordinate Settings button
location. The origin of coordinates is located at the upper left corner of the background image
with the X axis extending positively from left to right and with the Y axis extending positively from
up to down.
You can use the Layout buttons
management points.
button: Aligns the left edges of the selected areas or management points to the left edge of
button: Aligns the right edges of the selected areas or management points to the right edge
button: Aligns the upper edges of the selected areas or management points to the upper
button: Aligns the lower edges of the selected areas or management points to the lower edge
You can use the Alignment buttons
multiple areas or management points.
(27)
(28)
(24)
(23)
(25)
(26)
(25)
the leftmost of them.
of the rightmost of them.
edge of the uppermost of them.
of the lowermost of them.
(26)
Commissioning Manual (Layout Screen Creation Tool) EM11A024
DCM601A51 intelligent Touch Manager
to align vertically or horizontally multiple areas or
to evenly arrange (justify) vertically or horizontally
Commissioning Manual
(24)
and then
12
323
6