Daikin DCM601A51 Technical Data Manual page 189

ED721208
Centralized con-
trollers that cannot
be installed in
parallel with iTM
plus adaptor
2.3
18
To set the iTM plus adaptor to SLAVE, use the DIII
MASTER switch.
Placing the switch in the upper position (labeled as
To install multiple centralized controllers, set only the highest priority controller to MAS-
TER and all other controllers to SLAVE according to the following order of priority:
Interface for use in BACnet
High
Priority
Low
intelligent Processing Unit
Parallel Interface
Intelligent Touch Controller
Residential Central Remote Controller
Schedule Timer
The iTM plus adaptor can be connected with an external signal input device for stopping
air conditioners in an emergency, or with electric energy meters for calculating the elec-
WARNING
NOTE
Installation Manual 3P291714-3
DCM601A52 iTM plus adaptor
Installation Manual
SLAVE
MASTER
iTM plus adaptor (Main)
iTM plus adaptor (Sub)
English
5
-
185