ED721208
4.
(3)
port selected in
that can be installed together are as follows.
NOTE
This iTM is not displayed in (4).
5. Pressing the Refresh button
NOTE
If you install or uninstall another controller, please review the configuration of the Setpoint
Range Limit.
is a list of Connector Plugs for each iTM port.
(3)
Displayed information
DDS
Main CRC-1
Sub CRC-1
(Hidden)
Unknown
(5)
Commissioning Manual EM11A021
DCM601A51 intelligent Touch Manager
(4)
is a list of central units recognized on the
Applicable product
Interface for use in BACnet
Interface for use in LONWORKS
Central Remote Controller iTM
iTM plus adaptor
Service checker, LC
Central units other than the above
updates
(3)
and (4). Touching the OK button displays a
Commissioning Manual
6
40
245